Roborock Error 17 — Side brush module error
DIRECT ANSWER
COMMON CAUSES · RANKED
Motor stalled by a deep tangle MOST COMMON
Hair packed under the brush mount overloads the little motor until the electronics flag a fault.
Transient electronics glitch
A one-off drive fault that a system reset clears completely.
Burnt-out side brush motor UNCOMMON
If the error survives a cleaned brush and a reset, the module itself has failed and needs replacement by service.
HOW TO FIX IT
Remove and clean the side brush
Unscrew it and strip every hair off the shaft — rule out Error 6's cause before blaming the module.
Reset the system
Press the reset button, or hold the power button until the robot restarts.
Test with a short clean
Watch whether the side brush spins during the run.
Contact support if it returns
A recurring Error 17 with a clean brush means the drive module needs replacing.
COMPATIBLE PARTS
As an Amazon Associate, RoboFaults earns from qualifying purchases. Prices are shown on the retailer's site.
Side brush — S series
Replace the side brush when the arms deform; a warped brush flicks debris away instead of inward.
Check price on Amazon ↗RELATED FIRMWARE
S5 series (S5)
SAMPLE DATA — dataset in progressFirmware timelines are rebuilt monthly from release notes. Versions marked as sample data are community-reported and not yet verified. Full firmware timeline →
Sources
Corrections
Spotted an error? Report a correction — fixes ship within 48h and are logged on this page.