DreameBot D9 / D9 Pro / D9 Max replacement parts
4 parts that fit the DreameBot D9 / D9 Pro / D9 Max, with the official SKU where one exists.
Support status changes the repair-or-replace math. See the full table →
COMPATIBLE PARTS
As an Amazon Associate, RoboFaults earns from qualifying purchases. Prices are shown on the retailer's site.
Side brush — F9, D9 family, Z10 Pro, L10 Pro & D10 series
These single-side-brush DreameBots share the three-arm brush that pulls straight off its post. Dreame's US store has retired the classic-era brush, so the market is aftermarket kits — check your exact model in the listing. Replace it when the arms bend or the robot starts leaving edge dust.
Check price on Amazon ↗
Main brush — D9 family, L10 Pro & D10 Plus
Dreame's own store sells this bristle roller as one part for L10 Pro, D10 Plus, D9 Max and D9 Pro (the plain D9 brush is a separate official listing). Cut wrapped hair off the roller and both end caps before deciding it needs replacing.
Check price on Amazon ↗
Washable dust-box filter — F9, D9 family, Z10 Pro, L10 Pro & D10 Plus
The classic 570 ml dust box uses one washable pleated filter. Rinse it with water only, no detergent, and let it dry completely — at least 24 hours — before refitting; a damp filter chokes suction and can damage the fan. Dreame's store still lists an official two-pack for the D10 Plus.
Check price on Amazon ↗
Drag mop pads — D9 family & L10 Pro flat plate
These models drag a flat microfiber pad velcroed under the water tank — Dreame's store sells the official two-pack for D9, D9 Pro, D9 Max and L10 Pro. Wash the pad after every mopping run and replace it once the fiber glazes over and starts streaking.
Check price on Amazon ↗